4 stage audio and 6 stage visual LCD display from 2.0m to 0.4m
2 ultrasonic sensors installed on the trunk or between back lamp and bumper.
( 60 ~ 70 cm from the ground and 30 cm from the each side )
Display's distance, direction and sound
Aids reversing in all weathers
Easy installation on any vehicle
Especially design with wireless LCD display
No scratches
Approval: CE, FCC
¢Ê Specifications
Detection: ultrasonic sensor
Input power: DC 9V to DC 16V ( 24V with special wire)
Operating temperature: -25¡ÆC ~ 60¡ÆC
Length of wiring: 2.5m (sensor), 4m (main modules and monitor power wire)
Detection range display: 0.4m to 2.0m
Current consumption: under 50mA (main module), under 85mA (monitor)
Dimension: Main
control module : 70 (W) x 93(L) x 33(H)
Wireless
monitor : 74 (W) x 52(L) X 40(H)
Weight (with blister packing): 400g
Operating Frequency: 315MHz / 433.92MHz
¢Ê Operating Methods
When in reverse, the system sounds
a beep and senses the first detection zone (with
1.6m distance), second zone at 1.0m and the third
zone at 0.6m the alarm sounds progressively
From 0.4m the alarm sounds continually indicating the driver to stop
For the driver with hearing problems the displays shows 0.0m the actual distance is 0.1m
This system also indicates the closest side to an object left or right
¢Ê Operating Distance Display
step
Distance(cm)
Beep Sound
Monitor Display
Remark(mode)
1
Over 200cm
N/A
¡°¡Ü¡± Flashing
Reversing mode
2
160-200cm
N/A
¡°2.0¡± ~ ¡°1.6¡± Display
Detecting the object
3
100-160cm
Slowly beeping
¡°1.6¡± ~ ¡°1.0¡± Display
First alarm
4
60-100cm
Normally beeping
¡°0.6¡± ~ ¡°1.0¡± Display
Second alarm
5
40-60cm
Quickly beeping
¡°0.4¡± ~ ¡°0.6¡± Display
Third alarm
6
Within 40cm
Continuous beeping
¡°0.4¡± ~ ¡°0¡± Display sequence
Stopping the Car driving
Copyright(c)
KproKorea
All rights reserved. Contact Webmaster
for more information.
Product list
